Thermal processing of Beke oil sands

  • Ye. I. Imanbayev Al-Farabi Kazakh National University
  • Ye. K. Ongarbayev Al-Farabi Kazakh National University Institute of Combustion Problems
  • Ye. Tileuberdi Al-Farabi Kazakh National University Institute of Combustion Problems
  • F. R. Sultanov Al-Farabi Kazakh National University
  • B. K. Tuleutayev Institute of Combustion Problems
  • Z. A. Mansurov Al-Farabi Kazakh National University Institute of Combustion Problems

Abstract

In this work thermal method to processing organic part from oil sands were used. Content of organic part in oil sands was 9 wt. %. The composition of the oil sand was determined by elemental analysis and chemical composition of the organic part of oil sands was determined by infrared spectroscopy. The main properties of oil sands related to the structure and properties of the mineral, natural organic binder features of the interaction of mineral materials with organic binders, rock density, binder content and the degree of filling into the pores. The organic component of natural bitumen on the physical and chemical properties similar to high viscosity heavy crude oil.

References

1. Parviz M. Rahimi and Thomas Gentzis.: The chemistry of bitumen and heavy oil processing. National Centre for Upgrading Technology, Oil Patch Drive, Suite A202, Devon, – Alberta, Canada T9G 1A8. – p. 149-186.
2. P.K. Andy Hong, Zhixiong Cha, Xinyue Zhao, Chia-Jung Cheng, Willem Duyvesteyn.: Extraction of bitumen from oil sands with hot water and pressure cycles. Fuel Processing Technology. – 2013. – № 106. – p. 460–467.
3. Tileuberdi Ye., Ongarbaev Ye., Tuleutaev B., Mansurov Z., Behrendt F. Study of Natural Bitumen Extracted from Oil Sands // Applied Mechanics and Materials. – 2014. - Vol. 467. - P. 8-11.
4. Wang Qing, Jia Chunxia, Jiang Qianqian, Wang Yin, Deyin Wu.: Combustion characteristics of Indonesian oil sands. Fuel Processing Technology. - 2012. – № 99. – p. 110–114.
5. Yoon S., Bhatt S.D., Lee W. et al. Separation and characterization of bitumen from Athabasca oil sand // Korean J. Chem. Eng. – 2009. – № 26 (1). – P. 64-71
6. Mansurov Z.A.,Ongarbaev E.K., Tuleutaev B.K. Utilization of Oil Wastes for Production of Road-building materials // Eurasian Chemico-Technological Journal. – 2000. – № 2(2). – P. 161-166.
7. Nadirov N.K.Prospects of processing and use of oil sands in Kazakhstan // Oil sands: prospects of using. – Almaty: Nauka, – 1982. – P. 3-10(Russian).
8. http://en.wikipedia.org / wiki / Oil_sands
9. Sultanov F.R., Tileuberdi Ye., Ongarbayev Ye.K., Mansurov Z.A., Khaseinov K.A., Tuleutaev B.K., Behrendt F. Study of Asphaltene Structure Precipitated from Oil Sands // Eurasian Chemico-Technological Journal. – 2013. – Vol. 15, No. 1. – P. 77-81
10. O.V. Abramov, V.O. Abramov, S.K. Myasnikov, M.S. Mullakaev.: Extraction of bitumen, crude oil and its products from tar sand and contaminated sandy soil under effect of ultrasound. Ultrasonics Sonochemistry. – 2009. – Vol. 16. – p. 408-416.
11. [10]. Yue Ma, Shuyuan Li.: The pyrolysis, extraction and kinetics of Buton oil sand bitumen. Fuel Processing Technology – 2012. - Vol. 100. – p. 11–15.
12. Tileuberdi E., Ongarbayev Ye.K., Behrendt F., Schneider I., Imanbayev Ye.I., Tuleutayev B.K., Doszhanov Ye.O., Mansurov Z.A. Possibilities of preparation asphalt concrete by oil sands of Kazakhstan // KazNU Bulletin. Chemical series. – 2012. - № 4 (68). – Р. 9-13.
Published
2013-12-20
How to Cite
IMANBAYEV, Ye. I. et al. Thermal processing of Beke oil sands. International Journal of Biology and Chemistry, [S.l.], v. 6, n. 2, p. 55-59, dec. 2013. ISSN 2409-370X. Available at: <http://ijbch.kaznu.kz/index.php/kaznu/article/view/100>. Date accessed: 23 feb. 2019.

Keywords

oil sands; organic binder; deposit Beke